THE EVACUATOR® ESCAPE DESCENT SYSTEM

ESCAPE FROM HEIGHTS WITHIN 10 SECONDS

CLICK ON AND GO!

FIRE-PROOF, DESIGNED FOR TIME-CRITICAL PANIC-SITUATIONS. BASED ON SIMPLICITY, COMMON SENSE AND HUMAN INSTINCT.

 

Certified by German institute DEKRA EN341, in compliance with ANSI Z359/CSA Z259.

E165-200 model shown here is standardly equipped with 8 carabiner sets or 8 frog sets

Carabiner+frogset
E165_transparant940x1000
Evacuator_E165_render_mobile_product2023

E165-200 model shown here is standardly equipped with 8 carabiner sets or 8 frog sets

Carabiner+frogset

MODELS

Evacuator_models_2024_01-scaled
Standardly_equipped

CAPACITY

The Evacuator® utilises a user-friendly ‘click on and go’ mechanism. Each steel cable allows multiple persons to descent at the same time, providing their combined weight does not exceed 282 Kg on each steel cable / escape-hook. The total max. descent load on the system is 564 Kg. It is available in three models: Model E50 equipped with 4 cable reels. Models E140 / E165-200 equipped with 2 cable reels. Model E300 equipped with 1 cable reel.

productspecsTI_2_reels2023

In an emergency every second counts. With the Evacuator® escape descent system everybody can escape within 10 seconds.

 

Designed to save the lives at heights ranging up to 300 meters, the Evacuator® escape descent system is the world’s fastest and most user-friendly, fire proof, collective descent system, click on and go!

 

This award winning system provides a quick, intuitive escape and descent solution for everybody in an emergency situation. It is suitable for installation on wind turbines, offshore substations, harbour cranes and other high rise structures.

4 STEPS TO SAFETY

Step1

Go to the emergency exit

Step2-riggingplate2

Secure your harness on to rigging plate or yellow escape-hook

Step3

Open emergency exit

Step4a_2023

Start the descent

INTERNAL AND EXTERNAL MODELS

Evacuator_frontrunner_large

INTERNAL MODEL

Evacuator_toprunner-large

INTERNAL MODEL

Evacuator_outdoor-large

EXTERNAL MODEL

The Evacuator® escape descent system can be installed inside or outside.

evacuator_tool

Installation:
The solid surface where the Evacuator is going to be installed must be at least in compliance with the European Standard for Steel Constructions EN1090 and Eurocode3 class CC3 safety factor 1.65. This is the highest Class and also the highest safety factor within the European Standard for steel constructions.

 

Inspection and maintenance:
There is no fixed lifespan, as long as the Evacuator® passes the inspection by a certified technician. Once you have completed authorised training, the inspection can be done by your team for operational efficiency. The same applies to installation. The inspection itself can be completed within 15 minutes.

8 KEY POINTS

CLICK ON AND GO

ESCAPE WITHIN 10 SECONDS
The escape with the Evacuator® escape descent system does not require any time-consuming actions.
1. Go to emergency exit
2. Connect harness onto escape-hook 
3. Start descent

FIREPROOF

The Evacuator® escape descent system is fire-proof up to 1.200 °C

PANIC PROOF

In stressful panic-situations you ONLY need to go to the emergency exit. Everything you need for a safe descent is already pre-installed and fixed there where you need it. (Including additional survival suits or/and safety harnesses.)

COLLECTIVE ESCAPE

With 1 Evacuator® multiple persons can descent at the same time. 2 escape-hooks can be used at the same time with a Max. load of 282 Kg per escape hook. The Max. descent load on the system is 564 Kg.

NO ELECTRICITY

The Evacuator® escape descent system works fully automatic and does not require electricity. 

LIFESPAN >30 YEARS

INSTALLATION AND MAINTENANCE FRIENDLY, CAN BE DONE BY YOUR TECHNICIANS

PRE-INSTALLED IN WINDTURBINES

The Evacuator® escape descent system will be permanently installed on a central location somewhere inside the nacelle and its steel cables will already be permanently fixed at the emergency exits, or the complete system will be permanently installed outside on top of the turbine in a weatherproof storage box which is typhoon proof!

EDUCATION / TRAINING

The Evacuator® escape descent system does not require any special training but training models are available for educational purposes and multiple descent experiences.

WE ARE PROUD

THE EVACUATOR® ESCAPE DESCENT SYSTEM SIGNIFICANTLY IMPROVES THE SAFETY AND SURVIVABILITY OF TECHNICIANS IN THE WIND INDUSTRY

THE EVACUATOR® ESCAPE DESCENT SYSTEM SIGNIFICANTLY IMPROVES THE SAFETY AND SURVIVABILITY OF PEOPLE IN PANIC SITUATIONS AT HEIGHTS

  • A Fire Proof system up to 1200 degrees Celsius fitted with steel cables.
  • Panic Proof, instinctively simple to use, connect harnesses on preinstalled escape-hooks and start descent.
  • Escape-procedure within 10 seconds, just click on and go.
  • A fully automatic controlled descent, ±1 m/s.
  • The steel cables cannot burn or melt and can't get entangled.
  • Safe descent at all wind speeds.
  • Safe descent when structure is on fire and safe to use in extreme wet conditions or heavy rain fall.
  • No time consuming preparations due to pre-installed and fixed installation at the emergency escape hatches, always there where you need it, immediately ready to use.
  • No electricity required.
  • Multiple persons can descent, the total Max. descent load on the system is 564 Kg at the same time (Max. descent load per cable-reel 282 Kg).
  • In case of acute health problems/cardiac arrest a person can be safely on the ground within the 6 Golden minutes.
  • Escape procedure can be done with 1 hand (in case injury has been sustained to other hand).
  • Long Lifespan >30 years.
  • Low costs of ownership.
  • Easy installation on all high structures, wind turbine independent, onshore and offshore.
  • In case of wind turbines: Installation does not damage the nacelle-construction and does not interfere annual maintenance in the nacelle (No drilling required).
  • Certification by DEKRA Germany EN341, Class D, in compliance with ANSI Z359/CSA Z259.
  • Does not require any special training but training models are available for educational purposes and multiple descent experiences.
  • Maintenance friendly, visual inspection and system-test approx. 15 minutes.
  • Leasing options possible.

BRINGS COMPLIANCE:

The Evacuator escape descent system brings compliance to the Official European Safety Standard for Wind Turbines EN50308, Paragraph 4.2.2: “The descent device has to be fireproof enough to allow escape from the nacelle to the ground in the event of fire, it shall be suitable for the numbers of persons to be evacuated”.

BRINGS COMPLIANCE:

The Evacuator escape descent system brings adherence to the UK Offshore Safety Directive Regulator/HSE-Offshore Emergency Response Inspection Guide,

Appendix 8: MEANS OF ESCAPE,

PFEER ACoP paragraph 219 and 220: Dutyholders should have selected means of escape based on their contribution to reducing the risks of those who may have to escape from the installation to as low as reasonably practicable (ALARP).

DOWNLOADS

Evacuator®
User Manual E140 - E165

Evacuator®
Installation Maintenance Manual

Evacuator®
EU declaration of conformity

Evacuator®
Brochure

THE EVACUATOR® ESCAPE DESCENT SYSTEM

SUITS TO MULTIPLE HIGH RISE STRUCTURES

onandoffshore

Onshore and offshore wind turbines

platforms

Offshore platforms

cranes

Cranes

highrisebuildings

High rise buildings (refugee areas)

CONTACT US

Invalid Email
Invalid Number